Dahua Technology DH-IPC-EBW81242N-AS-S2 12MP Outdoor Network Panoramic Fisheye Camera with Night Vision - Manual (Page 45)

Operation Manual
34
Click Reset to clear the statistics data.
Step 3 Move the statistics box to the position that you want in the image.
Step 4 Click Apply .
The information will be displayed on the image after the face recognition function is
enabled.
6.2.2.2.12 Configuring Face Statistics
After enabling this function, face statistics information will be displayed on the image. When the
overlay function is enabled during intelligent rules configuration, this function is enabled
simultaneously.
Step 1
Select > Camera > Encode > Overlay > Face Statistics .
Figure 6-25 Face statistics
Step 2 Click next to Enable , and select the text alignment.
Click Reset to clear the statistics data.
Step 3 Move the statistics box to the position that you want in the image.
Step 4 Click Apply .
6.2.2.2.13 Configure Face&Body Counting
After enabling this function, face&body counting information will be displayed on the image. When
the overlay function is enabled during intelligent rules configuration, this function is enabled
simultaneously.
Step 1
Select > Camera > Encode > Overlay > Face&Body Counting .