Dahua Technology DH-IPC-EBW81242N-AS-S2 12MP Outdoor Network Panoramic Fisheye Camera with Night Vision - Manual (Page 67)

Operation Manual
56
6.4 Event
6.4.1 Setting Alarm Linkage
6.4.1.1 Setting Alarm-in
When an alarm is triggered by the device connected to the alarm-in port, the system performs the
defined alarm linkage.
Step 1
Select > Event > Alarm .
Step 2 Click next to Enable to enable alarm linkage.
Figure 6-48 Alarm linkage
Step 3 Select an alarm-in port and a sensor type.
● Sensor Type: NO or NC.
● Anti-Dither: Only record one alarm event during the anti-dither period.
Step 4 Select the schedule and arming periods and alarm linkage action. If the exiting schedules
cannot meet the scene requirement, you can click
Add Schedule to add new schedule. For
details, see "6.4.1.2.1 Adding Schedule".
Step 5 Click Apply .