Dahua Technology DH-IPC-EBW81242N-AS-S2 12MP Outdoor Network Panoramic Fisheye Camera with Night Vision - Manual (Page 66)

Operation Manual
55
Figure 6-47 Basic service
Step 2 Enable the basic service according to the actual needs.
Table 6-22 Description of basic service parameters
Function Description
SSH
You can enable SSH authentication to perform safety
management.
Multicast/Broadcast Search
Enable this function, and then when multiple users are viewing
the device video image simultaneously through network, they
can find your device with multicast/broadcast protocol.
CGI
Enable the function, and then other devices can access through
this service. The function is enabled by default.
Onvif
Genetec
Mobile Push Notification
Enable this function, and then the system will send the snapshot
that was taken when alarm is triggered to your phone, this is
enabled by default.
Private Protocol
Authentication Mode
Select the authentication mode from Security Mode and
Compatible Mode . Security mode is recommended.
Step 3 Click Apply .