Dahua Technology DH-IPC-EBW81242N-AS-S2 12MP Outdoor Network Panoramic Fisheye Camera with Night Vision - Manual (Page 135)

Operation Manual
124
Parameter Description
Parking Upper Limit
Repeat Alarm Time
When the alarm is triggered and this state
lasts for repetitive alarm time, the alarm
will be triggered again.
0 means Repeat Alarm function disabled.
Upper Limit Vehicle
Quantity Alarm
Enable upper limit vehicle quantity alarm
to set the upper threshold and duration of
vehicles in the area. When the number of
vehicles exceeds the threshold and the
congestion time exceeds the configured
continuous congestion time, an alarm will
be triggered. The upper threshold of
vehicles that trigger an alarm is 20
vehicles by default.
Step 6 Select time plan and click + Event Linkage .
● If the added time plan cannot meet your requirements, click Add Schedule to add an
arming schedule. For details, see "6.4.1.2.1 Adding Schedule".
● Click Event Linkage to add linked event and set linkage parameters. For details, see
"6.4.1.2 Alarm Linkage".
Step 7 Click Apply .
8.6 Setting Parking Space
This section introduces rule configuration and global configuration for parking space.
8.6.1 Rule Configuration
Set planned or open type for parking space.
Step 1
Select AI > Smart Plan .
Step 2 Click next to Parking Space , and then click Next .
Step 3 Click the Rule Config tab.
Step 4 (Optional) Click other icons at the right side of the image to draw detection area, exclusion
area, and filter targets in the image.
● Click to draw the rectangle area.
◇
If you select planned parking space, the rectangle area will be divided equally
according to the planned parking spaces number that you configured.