beautypg.com

Dahua Technology DH-IPC-EBW81242N-AS-S2 12MP Outdoor Network Panoramic Fisheye Camera with Night Vision User Manual

Page 30

background image

Operation Manual

19

Table 6-3 Description of exposure parameters

Parameter

Description

Anti-flicker

You can select from 50 Hz, 60 Hz and Outdoor.

50 Hz: When the electric supply is 50 Hz, the system adjusts the

exposure according to ambient light automatically to ensure that
there is no stripe appears.

60 Hz: When the electric supply is 60 Hz, the system adjusts the

exposure according to ambient light automatically to ensure that
there is no stripe appears.

Outdoor: You can select any exposure mode as needed.

Mode

Device exposure modes.

Auto: Adjusts the image brightness according to the actual

condition automatically.

Gain Priority: When the exposure range is normal, the system

prefers the configured gain range when auto adjusting according
to the ambient lighting condition. If the image brightness is not
enough and the gain has reached upper or lower limit, the system
adjusts shutter value automatically to ensure the image at ideal
brightness. You can configure gain range to adjust gain level when
using gain priority mode.

Shutter priority: When the exposure range is normal, the system

prefers the configured shutter range when auto adjusting
according to the ambient lighting condition. If the image
brightness is not enough and the shutter value has reached upper
or lower limit, the system adjusts gain value automatically to
ensure the image at ideal brightness.

Manual: Configure gain and shutter value manually to adjust image

brightness.

When the

Anti-flicker

is set to

Outdoor

, you can select

Auto

,

Gain

priority

,

Shutter priority

or

Manual

in the

Mode

list.

Exposure

Compensation

Sets the value, and it ranges from 0 to 50. The higher the value is, the

brighter the image will be.

Shutter

Set the effective exposure time. The smaller the value, the shorter the

exposure time will be.

Gain

When selecting

Gain Priority

or

Manual

in

Mode

, you can set Gain.

With minimum illumination, the camera increases Gain automatically to

get clearer images.