Dahua Technology DH-IPC-EBW81242N-AS-S2 12MP Outdoor Network Panoramic Fisheye Camera with Night Vision User Manual
Page 59
Operation Manual
48
Figure 6-39 SNMP (2)
Step 2
Select SNMP version to enable SNMP.
●
Select
V1
, and the system can only process information of V1 version.
●
Select
V2
, and the system can only process information of V2 version.
●
Select
V3
, and then
V1
and
V2
become unavailable. You can configure username,
password and authentication type. It requires corresponding username, password and
authentication type to visit your device from the server.
Using
V1
and
V2
might cause data leakage, and
V3
is recommended.
Step 3
In
Trap Address
, enter the IP address of the PC that has MIB Builder and MG-SOFT MIB
Browser installed, and leave other parameters to the default.
Table 6-17 Description of SNMP parameters
Parameter
Description
SNMP Port
The listening port of the software agent in the device.