Dahua Technology DH-IPC-EBW81242N-AS-S2 12MP Outdoor Network Panoramic Fisheye Camera with Night Vision - Manual (Page 63)

Operation Manual
52
Figure 6-43 QoS
Step 2 Configure QoS parameters.
Table 6-20 Description of QoS parameters
Parameter Description
Realtime Monitor
Configure the priority of the data packets that used for network
surveillance. 0 for the lowest and 63 the highest.
Command
Configure the priority of the data packets that used for configure or
checking.
Step 3 Click Save .
6.3.12 Platform Access
6.3.12.1 P2P
P2P (peer-to-peer) technology enables users to manage devices easily without requiring DDNS, port
mapping or transit server.
Scan the QR code with your smartphone, and then you can add and manage more devices on the
mobile phone client.
Step 1
Select > Network > Platform Access > P2P .
Figure 6-44 P2P
● When P2P is enabled, remote management on device is supported.
● When P2P is enabled and the device accesses to the network, the status shows online.
The information of the IP address, MAC address, device name, and device SN will be
collected. The collected information is for remote access only. You can cancel
Enable