Dahua Technology DH-IPC-EBW81242N-AS-S2 12MP Outdoor Network Panoramic Fisheye Camera with Night Vision - Manual (Page 69)

Operation Manual
58
Figure 6-50 Schedule
Step 2 Press and drag the left mouse button on the timeline to set arming periods. Alarms will be
triggered in the period in green on the timeline.
● Click Copy next to a day, and select the days that you want to copy to in the prompt
interface, you can copy the configuration to the selected days. Select the Select All
check box to select all days to copy the configuration.
● You can set 6 periods per day.
Step 3 Click Apply .
Step 4 (Optional) Click Time Plan Table to add a new time plan table.
You can:
● Double-click the table name to edit it.
● Click to delete the tale as needed.
6.4.1.2.2 Record Linkage
The system can link record channel when an alarm event occurs. After alarm, the system stops
recording after an extended period according to the
Post-Record setting.
Prerequisites
● After the corresponding alarm type ( Normal , Motion , or Alarm ) is enabled, the record channel
links recording. For details, see "10.3 Setting Record Plan".
● Enable auto record mode, the record linkage will take effect. For details, see "10.2 Setting Record
Control".
Setting Record Linkage
On the Alarm interface, click to enable record linkage, select the channel as needed, and set
Post-Record to set alarm linkage and record delay.
After Post-Record is configured, alarm recording continues for an extended period after the alarm
ends.