Brother HLL9410CDN Enterprise Color Laser Printer - Manual (Page 317)

Level 3 Level 4 Level 5 Level 6 Descriptions
Wired LAN TCP/IP APIPA - Allocate the IP address from the
link-local address range
automatically
1 .
IPv6 - Enable or disable the IPv6 protocol.
Ethernet - - Choose the Ethernet link mode.
Wired Status - - Display the Ethernet link status.
MAC Address - - Display the MAC address of the
machine.
Set to Default 2 - - Restore wired network settings of
your machine to the factory
settings.
Wired Enable 2 - - Turn on or off the wired interface.
WLAN(Wi-Fi)
2 Find Wi-Fi
Network - - Configure your wireless network
settings manually.
TCP/IP Boot Method - Choose the IP method that best
suits your needs.
IP Address - Enter the IP address.
Subnet Mask - Enter the Subnet mask.
Gateway - Enter the Gateway address.
Node Name - Enter the Node name.
WINS
Configuration - Select the WINS configuration
mode.
WINS Server Primary Specify the IP address of the
primary WINS server.
Secondary Specify the IP address of the
secondary WINS server.
DNS Server Primary Specify the primary DNS server's
IP address.
Secondary Specify the secondary DNS
server's IP address.
APIPA - Allocate the IP address from the
link-local address range
automatically.
1
IPv6 - Enable or disable the IPv6 protocol.
WPS/Push Button - - Configure your wireless network
settings using the one-button push
method.
WPS/PIN Code - - Configure the wireless network
settings using WPS with a PIN
code.
WLAN Status Status - Display the wireless Ethernet link
status.
Signal - Display the signal condition.
SSID - Display the wireless SSID.
Comm. Mode - Display the current Communication
mode.
MAC Address - - Display the MAC address of the
machine.
312