Brother HLL9410CDN Enterprise Color Laser Printer - Manual (Page 316)

Level 3 Level 4 Level 5 Descriptions
Carbon Menu Copy8 Tray
Copy2 Stream
...
Copy8 Stream
- Select a stream for Copy2 to 8.
Color Correction Correction
Start
- Perform color calibration to check and correct colors,
and then perform registration to align the print
position of each color.
Reset - Reset the calibration parameters to the default
settings.
Auto
Correction - Set the machine to perform Color Calibration and
Registration automatically.
Color Settings Setting Mode Select whether to apply the color print settings of the
machine or the printer driver.
Color Mode Select the color mode.
Improve Gray
Color Turn on or off to improve the image quality of shaded
areas.
Enhance Black
Printing Turn on or off if a black graphic does not print
correctly.
Brightness Adjust the brightness.
Contrast Adjust the contrast.
Red Adjust the red color.
Green Adjust the green color.
Blue Adjust the blue color.
Job Save
Location - - Select the location where you want to save print
jobs.
Reset Printer - - Restore the printer settings to the factory settings.
[Network]
[All Settings] > [Network]
Level 3 Level 4 Level 5 Level 6 Descriptions
Wired LAN TCP/IP Boot Method - Choose the IP method that best
suits your needs.
IP Address - Enter the IP address.
Subnet Mask - Enter the Subnet mask.
Gateway - Enter the Gateway address.
Node Name - Enter the Node name.
WINS
Configuration - Select the WINS configuration
mode.
WINS Server Primary Specify the IP address of the
primary WINS server.
Secondary Specify the IP address of the
secondary WINS server.
DNS Server Primary Specify the primary DNS server's
IP address.
Secondary Specify the secondary DNS
server's IP address.
311