Brother HLL9410CDN Enterprise Color Laser Printer - Manual (Page 311)

Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features
Tables > Settings Tables
Settings Tables
>> [Settings]
>> [General Setup]
>> [Printer]
>> [Network]
>> [Print Reports]
>> [Machine Information]
>> [Initial Setup]
[Settings]
[Settings]
Level 2 Level 3 Level 4 Descriptions
Toner Toner Life - View the approximate remaining toner life.
Test Print - Print a test page.
Color Correction Correction
Start
Perform color calibration to check and correct colors,
and then perform registration to align the print position
of each color.
Reset Reset the calibration parameters to the default settings.
Network Wired LAN - Access the Wired LAN setting menus.
WLAN(Wi-Fi) 1 - Access the WLAN setting menus.
Tray Setting - - Access the tray setting menus.
Wi-Fi Direct - - Access the Wi-Fi Direct setting menus.
Eco Mode - - Turn on the following machine settings at the same
time.
• 2-sided Print : Long Edge 2
• Sleep Time : 0 Min
• Dim Timer : 10 Secs
• Quiet Mode : On 2
• Toner Save : On 2
All Settings - - Configure the detailed settings.
1 For certain models, the wireless network connection can be used only when the optional Wireless Module is installed.
2 Changing this setting is available after you change certain machine settings using Web Based Management.
[General Setup]
[All Settings] > [General Setup]
Level 3 Level 4 Level 5 Level 6 Descriptions
Tray
Setting Paper Type MP Tray - Select the paper type that matches the paper in
the MP tray.
Tray 1 - Select the paper type that matches the paper in
the standard paper tray.
Tray 2 1 - Select the paper type that matches the paper in
the Optional Tray (Tray 2).
306