Brother HLL9410CDN Enterprise Color Laser Printer - Manual (Page 29)

Home > Paper Handling > Load Paper > Load and Print Using the Paper Tray > Load Paper in the Paper
Tray
Load Paper in the Paper Tray
• If the Check Paper setting is set to On and you pull the paper tray out of the machine, a message appears
on the LCD asking if you want to change the paper size and paper type. Change the paper size and paper
type settings if needed, following the LCD instructions.
• When you load a different size and type of paper in the tray, you must also change the Paper Size and
Paper Type settings in the machine, or on your computer.
1. Pull the paper tray completely out of the machine.
2. Press the green levers to slide the paper guides to fit the paper.
3. Fan the stack of paper well.
4. Load paper in the paper tray with the printing surface
face down .
When you use letterhead or preprinted paper, load the paper in the correct orientation.See Related
Information : Change Machine Settings to Print on Letterhead or Preprinted Paper Using the Paper Tray.
5. Make sure the paper is below the maximum paper mark ( b b b ).
Overfilling the paper tray will cause paper jams.
6. Slowly push the paper tray completely into the machine.
24