Brother HLL9410CDN Enterprise Color Laser Printer - Manual (Page 264)

Home > Troubleshooting > Reset Functions > Factory Reset
Factory Reset
Use the Factory Reset function to restore all settings back to the factory settings.
Unplug all the interface cables before you perform a Factory Reset.
1. Press [Settings] > [All Settings] > [Initial Setup] > [Reset] > [Factory Reset] .
2. You will be asked to reboot the machine. Press the option in the table to reboot the machine or to exit the
process.
Option Description
Press Yes for 2 seconds Reboot the machine. The machine will begin the reset.
No The machine will exit without rebooting.
If you do not reboot your machine, the reset process will not finish and your settings will remain unchanged.
Related Information
• Reset Functions
259