Pack and ship your machine, Warning – Brother HLL9410CDN Enterprise Color Laser Printer User Manual
Page 296
> Pack and Ship Your Machine
Pack and Ship Your Machine
WARNING
•
To prevent possible injuries, at least two people should lift the product by holding it at the front and back.
•
When you move the machine, carry the machine as shown in the illustration.
•
If the machine has the Optional Tray(s) installed, remove the Optional Tray(s) BEFORE moving the
machine. Attempting to move the machine without removing the Optional Tray(s) may cause injury to you
or damage to the machine.
•
Pack the Optional Tray(s) separately in its original carton with original packing material.
•
If for any reason you must ship your machine, carefully repack the machine in the original packaging to
avoid any damage during transit. The machine should be adequately insured with the carrier.
•
Unless you are returning the machine as part of the Brother Exchange Service, leave the toner
cartridges and the drum unit inside the machine when you pack and ship it.
•
The components included in the box may differ depending on your country.
1. Press and hold
to turn off the machine. Leave the machine off for at least 10 minutes to cool down.
2. Disconnect all the cables, and then unplug the power cord from the AC power outlet.
3. Put the machine into the bag it originally came in.
4. Pack the machine, the printed materials, and the AC power cord (if applicable) in the original carton with the
original packing material as shown. (The original packing material may differ depending on your country.) If
you are returning your machine to Brother as part of the Exchange Service, pack only the machine.
291