Brother HLL9410CDN Enterprise Color Laser Printer - Manual (Page 298)

Home > Routine Maintenance > Replace Periodic Maintenance Parts
Replace Periodic Maintenance Parts
Replace the following parts regularly to maintain print quality. The parts listed below must be replaced after
printing approximately 50,000 pages
1 for the Paper Feeding Kits of the MP tray, approximately 100,000 pages 1
for the Paper Feeding Kits of the optional paper tray and approximately 200,000 pages 1 for the Paper Feeding
Kits of the standard paper tray, Fuser Unit, and Laser Unit.
Contact Brother Customer Service or a Brother Authorized Service Center when the following messages appear
on the LCD:
LCD Message Description
Maintenance
Replace Fuser
2
Replace the Fuser Unit.
Maintenance
Replace Laser 2
Replace the Laser Unit.
Maintenance
Replace PF Kit 1
2 3
Replace the Paper Feeding Kit for the Standard Paper Tray.
Maintenance
Replace PF Kit 2
2 3 4
Replace the Paper Feeding Kit for the Optional Tray.
Maintenance
Replace PF Kit MP 2 3
Replace the Paper Feeding Kit for the Multi-purpose (MP) Tray.
Related Information
• Routine Maintenance
1 Letter or A4 size 1-sided pages.
2 The replacement frequency depends on the complexity of printed pages, percentage of coverage, and the type of media used.
3 The kit includes the roller holder assembly, separation pad, and separation pad spring for the paper tray or MP Tray.
4 If you use the Optional Tray(s) with your machine, this message will appear on the LCD. When the machine has multiple Optional Trays, the
machine displays messages using numbers corresponding to each Optional Tray.
293