Datavideo SE-1200MU 6-Input Switcher and RMC-260 Controller Bundle - Manual (Page 69)

69
Windows PC Users
Click Setup from the MENU SELECT
area and select Import-Export from
the yellow menu options.
To import a Still picture file from the
computer into the SE-1200 MU select
Import Still .
To export an existing Still file from the
SE-1200 MU to the computer, select
Export then Export Still .
Caution: When importing or exporting make sure the correct
Still number is used.
Still picture files when exported from
the switcher are stored on the
computer within the following folders.
C: > Datavideo > se1200 >
user_data > …
Exported Still picture files can be found
in the
export based stills folder (see
the diagram on the right).
For each image exported, there will be two files, a thumbnail picture ending .mini and the full screen
image ending .pic. These files can be then imported to another SE-1200 MU by pasting the files into the
Import based stills folder on the second SE-1200 MU.
Importing Stills
For import type of bmp/png/jpg, the SE-1200 MU will do the conversion to .pic first, then import the .pic
files.