Datavideo SE-1200MU 6-Input Switcher and RMC-260 Controller Bundle - Manual (Page 22)

22
3.2.2.3 Modify the device IP settings with the Controller Software
Click Setup in the MENU SELECT panel and the current IP Network settings are shown alongside the
software version.
Note: If the network settings are wrong then you may not be able to control the SE-1200 MU. Always
keep a note of the last IP settings used and change these settings carefully to avoid problems.
Target IP Addr – This is the target IP address i.e. the location on the local network, or the internet, where
the software can talk to the SE-1200 MU. By clicking Target IP Addr you can enter a new address, once