2 source labels (windows only), 2 video stream based multi view, 1 preparing the se-1200 mu stream output – Datavideo SE-1200MU 6-Input Switcher and RMC-260 Controller Bundle User Manual
Page 29: Source labels (windows only), Ideo, Tream, Ased, Ulti, Preparing the se-1200 mu stream output, Section 5.2.1
29
5.1.2 Source Labels (Windows Only)
The multi view source labels can be changed. First
click Inputs
menu then
choose the input
you wish to
name
. Then use the pop up keyboard to edit the selected input name. Press
Enter
to store the change, the
new Multi view label should now be displayed.
Note:
The label will accept up to 16 characters but only the first 10 are displayed.
A
Freeze option
is provided for use when you wish to grab and save a still image from a selected input, see
A
ProcAmp option
is provided for adjustment of an input’s white, black or chroma level. It may be easier or
better to adjust an incoming image at the source equipment, please seek advice before changing these
settings.
Note: MAC users are not granted access to modify the video source labels.
5.2
Video Stream Based Multi View
The SE-1200 MU is able to send, or stream, its multi view image over the same IP network connection used
for controlling the switcher. This allows the user to see the multi view on the same computer that is
remotely controlling the switcher.
This streamed multi view can then be viewed using a third party software application called VLC Media
Player, version 2.1.5 or later is recommended. To download the latest free version of VLC Media Player
please visit
5.2.1 Preparing the SE-1200 MU Stream Output
Windows PC Users
First click the
OUTPUTS
menu button in the SE-1200 MU software control interface. Then select the
STREAMER option in the yellow menu panel
on the left hand side. The user can now select the size of the
multi view being streamed. Options are
Full, Half, Quarter
and
Sixth
.