1 router based dhcp setup – Datavideo SE-1200MU 6-Input Switcher and RMC-260 Controller Bundle User Manual
Page 20

20
3.2.2.1 Router Based DHCP Setup
The computer software can also access and control the SE-1200 MU over an existing TCP/IP LAN type
network. In order to initially set up the SE-1200 MU, you may need the assistance of your local I.T.
specialist to help with the network settings. To help guide you, we have included a simplified network set
up example below, further advice may be available through your dealer locally or your Datavideo regional
office.
To create this simple dedicated SE-1200 MU IP network you will need:
An IP router which can assign/give IP
addresses
Two RJ-45 patch leads
Mac Computer or MacBook
The IP router Administrator login and
password
The Datavideo SE-1200
MU controller software
Instructions
1.
First connect the router to the SE-1200 MU and the Mac computer using two RJ-45 patch leads.
2.
Turn on the Mac computer and then click the
System Preferences
icon.
3.
On the
System Preferences
window, click the
Network
icon and then select the
Ethernet
option.
4.
Select “
Use DHCP
” from the
IPv4 Setting
drop-down menu.