3 key 1 & key 2 priority key function, 3 transition effects, 1 cutting between sources – Datavideo SE-1200MU 6-Input Switcher and RMC-260 Controller Bundle User Manual

Page 36: Key 1 & key 2 priority key function, Ransition, Ffects, Cutting between sources

Windows PC Users

MAC Users

6.2.3 Key 1 & Key 2 PRIORITY Key Function

The

PRIORITY

button toggles the layer order or priority of

Key 1

Key 2

Windows PC Users

MAC Users

When Key 1 and Key 2 are both active in Preview (or Program), they may overlap each other on the screen.
Using the Priority Button you can change the order of these keyers. The button acts in a toggle on/off way,
i.e. Key1 over Key2 or Key2 over Key1.

NOTE

: It is best to check and change the Priority of Key 1 and Key 2 when they are initially active on the

Preview monitor/output.

6.3

Transition Effects

The SE-1200 MU provides the user with options for cutting or transitioning between the selected preset
and program video sources.

6.3.1 CUTTING between Sources

Cutting between sources is a clean switch from the current Program video to the next source image. This
can be achieved in two ways:

Program row buttons

Each button press on the Program row will cause an instant clean cut to the selected source. (Active
selection is backlit red)

Cut button

Selecting the next source on the lower

Preset row

of buttons and then pressing the

Cut

button.