Datavideo SE-1200MU 6-Input Switcher and RMC-260 Controller Bundle - Manual (Page 17)

17
Ethernet Addr – This is the target IP address i.e. the location on the local network, or the internet, where
the software can talk to the SE-1200 MU. By clicking Ethernet Addr you can enter a new address, once
entered click Enter . The next time the software controller is opened, it will try to contact the switcher on
this new Target IP address.
Network – This option in the yellow menu column allows you to change the network options on the SE-
1200 MU. When delivered from the factory the default static IP settings should be:
Set up: Static (a manually set IP address that does not change even after power cycling the SE-1200
MU unit)
IP address: 192.168.100.101
Subnet Mask: 255.255.255.0
Gateway: 192.168.100.1
DHCP Setup - If the IP set up method is changed to DHCP then each time the SE-1200 MU is started, it may
be given a different IP address by the network. Only use this method if you know how to find the SE-1200
MU on the internal IP network. A device on the network (usually a router or server) will automatically give
a spare or fixed IP address to the SE-1200 MU. The other settings such as IP address, Subnet Mask and
Gateway may appear blank within the controller software as these would be automatically set by network
router/DHCP server.