Datavideo SE-1200MU 6-Input Switcher and RMC-260 Controller Bundle - Manual (Page 56)

56
2. The Bus Matte parameters are shown in a row at the bottom of the screen.
3. The circular Color Palette allows selection of a color for the Bus Matte .
4. Click anywhere on the Color Palette to move the crosshair and display the currently selected Hue or
color. The RGB values for the selected color are then shown on the right.
5. The Luma value determines how light or dark the selected color or hue is. Click on the Luma value and
enter a new value. A small percentage value will make the color dark and a larger value will make the
color brighter.
6. The Sat or Saturation value moves the crosshair from the center of the color palette to the outer edge
of the circle. The Sat value can be finely adjusted by clicking on the Sat value and entering a new value.
If the Hue angle is set to 180 degrees (6 o’clock position) then the Sat value determines how much
Cyan is in the matte.
7. The Hue value moves the crosshair around the color palette in a clockwise or anti-clockwise direction.
The Hue value/angle can be finely adjusted by clicking the Hue value and entering a new value.
Certain color hues can be found at certain angles on the color palette. For example, Red is 0 degrees
(12 o’clock position), Green is approx. 120 degrees (4 o’clock position) and Blue is approx. 240 degrees
(8 o’clock position).
MAC Users
The Matte option on the MENU SELECT panel allows the user to configure the matte image.
1. Click the Matte button on the MENU SELECT panel.