Datavideo SE-1200MU 6-Input Switcher and RMC-260 Controller Bundle - Manual (Page 67)

67
9.1 Stills – Grab and Save
On the previous page we learned how to Freeze a video input so we are now ready to Grab and Save that
frozen image.
1. The input that has been frozen ready for capture is best displayed on the Program monitor by
selecting it on the Program source row . The video can then be displayed for the user to freeze the
image at the right point.
2. Click the Stills button in the MENU SELECT panel.
Windows PC Users MAC Users
3. Click Grab and Save from the yellow menu column on the left of the currently stored image matrix. Up
to 1000+ images can be stored within the SE-1200 MU.
Windows PC Users MAC Users
4. Click the Still value in the bottom row of options and enter the stills number for the new image you are
about to capture.
Note: Make sure this is an empty memory position otherwise the existing saved still could be
overwritten and lost.
Windows PC Users MAC Users
5. Click Grab Still to capture the freeze image from the SE-1200 MU’s Program output into working
memory.
6. Now click Save Still to move the captured image into the chosen Stills matrix number. The stills matrix
will update and display a small thumbnail of the captured image at the chosen stills number.