Datavideo SE-1200MU 6-Input Switcher and RMC-260 Controller Bundle - Manual (Page 28)

28
Chapter 5 Advanced Video Connection
In this chapter, you will learn advanced methods of performing advanced video connection settings.
5.1 Inputs – Setup
In this section, we will show you how you can switch input connections without changing physical
connections at the rear panel.
5.1.1 Crosspoint
The CROSSPOINT function allows you to cross assign input channels to program/preset row buttons.
Follow the steps outlined below to customize the assignment of video input channels to program/preset
row buttons.
Windows PC Users
The physical input sources can be swapped around
within the SE-1200 MU by using the
cross point
section of the Inputs menu .
Click a crosspoint (lower row) then click again
on the required input (upper row) to link them.
The example above shows inputs 2 and 3
swapped.
MAC Users
The physical input sources can be swapped around
within the SE-1200 MU by using the cross point
section of the Inputs menu.
Click a crosspoint (lower row) then click again on
the required input (upper row) to link them. The
example above shows inputs 2 and 3 swapped.