Panel descriptions, Top panel, Getting ready – Roland TD-50X Prismatic V-Drums Sound Module User Manual
Page 8

8
Getting Ready
Panel Descriptions
Top Panel
6
7
8
9
4
1
2
5
3
1
[MASTER] knob
Adjusts the volume from the MASTER OUT jacks.
[PHONES] knob
Adjusts the volume of headphones connected to the PHONES jack.
2
TRIG SELECT
[LOCK] button
When you press the [LOCK] button to make it light up, the pad to
set does not switch to a different pad even if you strike it.
[RIM] button
When using a pad that supports rim playing, this selects whether to
set the head or the rim. For pads that support three-way triggering,
this switches between the head, rim and bell.
SELECT [
K
] [
J
] buttons
Selects the pad to configure (trigger input number).
3
[F1]–[F5] buttons (Function buttons)
The function of these buttons changes depending on what is
shown in the display. Use them to switch between the tabs shown
in the upper part of the display, or to set the functions in the upper
and lower parts of the display.
[R1]–[R3] knobs (rotary knobs)
The function of these knobs changes depending on what is shown
in the display. Use these controls to change the function values
shown in the lower part of the display.
PAGE [DOWN] [UP] buttons
Press these buttons when the PAGE [UP] [DOWN] buttons are lit to
switch between screen pages.
TRIGGER ACTIVITY indicator
These indicators light when a trigger signal (the signal outputted
from a pad when it is struck) is received. Use them to check whether
the pads are properly connected.
Display
Shows various information for the operation.
4
[MIX IN] knob
Adjusts the volume of the input sounds from the MIX IN jacks on
the front and rear panels.
[SONG] knob
Adjusts the volume of a song (audio file). Note that this has no
effect on the built-in drum performance sounds or the performance
sounds of recorded drums.
[SONG] button
Displays the SONG screen. Press this when you want to play back a
song or recorded data, or to make song-related settings.
[CLICK] knob
Adjusts the click volume.
[CLICK] button
This lets you play the click sound and make click or tempo-related
settings. You can also use this for training your sense of rhythm.