Roland TD-50X Prismatic V-Drums Sound Module - Manual (Page 48)

48
Using the Utilities
Swapping or renaming set lists
2 . Press the [F5] (SETUP) button.
The setup screen appears.
Button Explanation
[F1] (MOVE LIST H )
button
Changes the order of the set list at the cursor
position.
[F2] (MOVE LIST I )
button
[F4] (NAME)
button
Renames the set list at the cursor position
(p. 36).
[F5] (STEP EDIT)
button Edits the steps of the set list at the cursor
position.
Editing the set list steps
3 . Press the [F5] (STEP EDIT) button.
The SETLIST STEP EDIT screen appears.
Set list number
Step number
Drum kit at this step
4 . Use the cursor buttons to select each step, and use the
[-] [+] buttons or the dial to edit the settings.
Button Explanation
[F4] (DELETE)
button
The drum kit at the cursor position is deleted,
and steps after this point are moved forward one
place.
[F5] (INSERT)
button
The same kit is inserted at the cursor position,
and steps after this point are moved backward
one place.
MEMO
If the set list is empty, move the cursor to “END” and use the [-] [+]
buttons or the dial to specify a drum kit.
5 . Press the [KIT] button to return to the SET LIST screen.
Using Set Lists
Selecting the set lists
1 . Press the [SET LIST] button to make it light.
The set list turns on.
2 . Press the [F1] ( K SET LIST) button or [F2] (SET LIST J )
button to select the set list that you want to use.
Switching between drum kits
1 . Use the [-] [+] buttons or the dial to recall the drum kits
in the order of the steps you specified.
2 . When you’ve finished playing, press the [KIT] button or
the [EXIT] button. The [SET LIST] button goes dark.
The set list function turns off.
MEMO
5 You can assign the appropriate function to a footswitch or pad, and
use it to recall set lists or drum kits. For details, refer to “Assigning
Functions to Footswitches or Pads (CONTROL)” (p. 60).
5 If the volumes set for each kit vary considerably, press the [MIXER]
button to adjust (p. 32) the Kit Volume (the volume for the overall
kit).