Roland TD-50X Prismatic V-Drums Sound Module - Manual (Page 21)

21
Performing
Playing Back a Audio File as a Click
(Click Track)
You can use an audio file (WAV) separate from the song for the click,
and play it back as the click (click track).
Since the click track plays simultaneously with the song, this is useful
when you want to play a click sound along with the songs you like.
* To play back a click track, you must prepare a song as well as an
audio file to use for the click, both in WAV format. MP3 files are not
supported.
Getting the click track audio file ready
1 . Have ready an audio file (WAV file) to play back as the
click track.
2 . On your computer, edit the file name of the file that
you prepared in step 1.
Specify “song file name+ _Click ” as the name of the audio file to
play as the click track.
Example:
To play the click track along with a song named “TD-50X.wav,”
specify “TD-50X _Click .wav ” as the name of the click audio file.
3 . Save the click audio file in the same directory as the
song that’s on the SD card (p. 53).
In the example above, you would save “TD-50X.wav” and “TD-50X _
Click .wav” in the same directory.
Playing the click track along with the song
1 . On the SONG screen, press the [F2] (SD CARD) button
(p. 18).
2 . Use the [R2] knob, [-] [+] buttons or the dial to select
the song that you want to play back along with the
click track.
In the example above, select the song “TD-50X.wav.”
3 . Press the [F5] button to specify “CLICK ON.”
4 . Press the [ s ] button.
The click track plays back together with the song.
To adjust the click track volume, turn the [CLICK] knob.
In the example above, use the [SONG] knob to adjust the volume
of “TD-50X.wav,” and use the [CLICK] knob to adjust the volume of
“TD-50X_Click.wav.”
MEMO
5 To mute the click track, press the [F5] button to specify “CLICK OFF.”
5 You can also output the click track only to headphones (p. 57).
Rhythm Training
(Coach Mode)
This unit features practice modes, collectively called “Coach Mode.”
These modes help you to practice as effectively as possible.
Three menus are available:
“TIME CHECK,” “QUIET COUNT,” and “WARM UPS.” These menus help you
improve your speed control, accuracy, and endurance. You can also
change the settings as appropriate for your level of performing skill.
Selecting a practice menu
1 . Press the [CLICK] button.
The CLICK screen appears.
2 . Press the [F4] (COACH) button.
The COACH MENU screen appears.
3 . Use the cursor buttons to select the coach menu, and
press [ENTER] button.
Correctly Playing in Time with the
Beat
(TIME CHECK)
This lets you practice drumming in accurate time along with the click.
1 . In the TIME CHECK screen, press the [F5] (START)
button.
If you decide to stop mid-way through practice, press the [F4] (STOP)
button.
2 . Strike the pad in time with the click.
The percentage of your strikes that
were played with accurate timing is
displayed as a “%” value.
The screen indicates whether your pad strikes
match the beat sounded by the click.
BEHIND: Behind the beat
AHEAD: Ahead of the beat
Your strike timing is evaluated.
To resume practicing, press the [F5] (RETRY) button.
3 . Press the [EXIT] button to finish.