Roland TD-50X Prismatic V-Drums Sound Module - Manual (Page 60)

60
Settings
Parameter Explanation
Master Out
With the “DIRECT” setting
5 The master compressor and master EQ
effects are not applied to the output from
the MASTER OUT jacks, allowing you to
use the MASTER OUT jacks as DIRECT OUT
jacks (the setting of the [MASTER] knob is
applied). This setting also applies to the
output via USB audio to your computer.
5 The PHONES jacks output the sound
processed by the master compressor and
master EQ.
5 If you want the output of the MASTER
OUT jacks to be output as direct output,
assign the output to MASTER DIRECT in
the PAD OUTPUT screen (DIRECT tab) and
the OTHER OUTPUT screen (DIRECT tab).
Reference
For other settings, refer to “Data List” (PDF).
Other Settings
(OPTION)
These settings are for the [PREVIEW] button, MIX IN jacks, the display
and so on.
Reference
For details on the parameters that can be edited, refer to “Data List”
(PDF).
1 . In the SETUP MENU 1 screen (p. 57), press the [F3]
(OPTION) button.
The option settings screen appears.
2 . Press the [F1] (PREVIEW)–[F4] (CUSTOMIZE) buttons to
select the item you want to edit.
Button Explanation
[F1] (PREVIEW)
button Sets how the sound plays when you press the
[PREVIEW] button.
[F2] (MIX IN)
button
Configures the MIX IN jack.
[F3](LCD) button Adjusts the display contrast.
[F4] (CUSTOMIZE)
button
Toggles the display of the guide that appears
momentarily when you switch pages, and edits
the order in which parameters are displayed on
the INSTRUMENT screen.
3 . Use the cursor buttons to select a parameter, and use
the [-] [+] buttons or the dial to edit the value.
4 . Press the [KIT] button to return to the DRUM KIT screen.
Assigning Functions to Footswitches or Pads
(CONTROL)
Footswitches (BOSS FS-5U, FS-6; sold separately) or pads that are
connected to the TD-50X can be assigned to control functions such as
switching drum kits or switching set lists.
Reference
For details on the parameters that can be edited, refer to “Data List”
(PDF).
Assigning a function to a footswitch
Connecting an FS-5U
SW2 SW1
TIP RING
Polarity switch
Stereo 1/4” phone type
1/4” phone type × 2
* If you use a mono cable to connect a single FS-5U, it will operate as
SW 2.
* The FS-5L cannot be used.
Connecting an FS-6
SW2
SW1
Mode/
Polarity switch
Stereo 1/4” phone type
Stereo 1/4” phone type
1 . In the SETUP MENU 1 screen (p. 57), press the [F4]
(CONTROL) button.
2 . Press the [F1] (FOOT SW) button.
FOOT SWITCH CONTROL screen appears.
3 . Use the cursor buttons to select a parameter, and use
the [-] [+] buttons or the dial to edit the value.
MEMO
If you want to switch between drum kits in the set list (p. 47) with
a footswitch, set the footswitch’s assigned function to “KIT# DEC” or
“KIT# INC,” and press the [SET LIST] button to make it light. (Make
the set list settings in advance.)
4 . Press the [KIT] button to return to the DRUM KIT screen.