Roland TD-50X Prismatic V-Drums Sound Module - Manual (Page 63)

63
Appendix
List of Displayed Messages
Error Message List
Message Meaning Action
Format SD Card Error! Failed to format the SD card.
Insert an SD card correctly.
Unlock the SD card.
Incorrect File! The backup data or the kit backup data is damaged. Do not use this data.
MIDI Buffer Full!
A large amount of MIDI messages were received in a short
time, and could not be processed completely.
Confirm that the external MIDI device is properly connected.
If the problem persists, reduce the amount of MIDI messages
sent to the TD-50X.
MIDI Offline!
A MIDI cable is disconnected (alternatively, communication
with the external MIDI device was interrupted for some
reason).
Check to make sure the MIDI cable has not been
disconnected and that there is no short in the cable.
No Backup Data! There is no backup data on the SD card. –
No Data!
You attempted to export a song for which recorded data
does not exist.
Export a song for which recorded data exists.
No SD Card! No SD card is in the SD card slot. Insert an SD card correctly.
Rec Data Exists! Change Rec
Number or Check Overwrite.
Recorded data already exists.
Change the recording destination, or change the settings
for overwriting recording data (p. 25).
Rec Data Full!
The storage capacity of the song recorder is full, and
recording has stopped.
–
Recording was stopped because the maximum number of
sounds for a single song was exceeded.
Rec Length Too Long!
Recording stopped because the recording length limit
was exceeded. (The recorder used on this unit records
performance data in units of measures.) Lower the tempo or increase the beat in the click settings
when recording (p. 17).
Try editing (rearranging) the song to make it shorter.
Sample Length Too Long! The audio file is too long, and cannot be imported. Files longer than 180 seconds cannot be imported.
Sample Length Too Short! The audio file is too short, and cannot be imported.
In some cases, audio files shorter than one second cannot
be imported.
SD Card is Locked!
The SD card is locked. Unlock the SD card.
The file attribute is read-only. Check whether the file might be write-protected.
SD Card is not connected! No SD card is in the SD card slot. Insert an SD card correctly.
SD Card Media Error!
The data on the SD card is damaged.
Copy the necessary data from the SD card, and then format
the SD card on the TD-50X (p. 56). If this does not solve
the problem, try a different SD card.
Failed to save recorded data. Check the lock status of the SD card.
Failed to export the song. Check whether the file might be write-protected.
SD Card Memory Full! There are no empty space on the SD card. Delete unneeded data (p. 55).
System Overload! The unit’s processing could not keep up. Reduce the number of notes that play simultaneously.
Unsupported format! This unit does not support this format.
Check whether this file format can be played (song (p. 19),
user sample (p. 39)).
User Sample Does Not Exist! User samples do not exist. Select a location where user samples exist.
User Sample Exists! User samples exist. Delete the user samples, or select a vacant location.
User Sample Import Error!
The audio data to be imported is damaged. Do not use this audio data.
The data on the SD card is damaged. Do not use this SD card.
User Sample Memory Error!
The backup data or kit backup data including user samples
is damaged.
Do not use this data.
The data on the SD card is damaged. Do not use this SD card.
Empty user samples are assigned to a kit (Only for 1 KIT
SAVE) You can’t use 1 KIT SAVE for a kit to which empty user
samples are assigned.
User Sample memory full! There is no free user sample space. Delete unneeded user sample (p. 41).