Roland TD-50X Prismatic V-Drums Sound Module - Manual (Page 55)

55
Settings
7 . Select “OK,” and press the [ENTER] button.
The kit backup data is saved on the SD card.
Loading Kit Backup Data from an SD Card
(1 KIT LOAD)
This shows how to load kit backup data that is saved on the SD card or
downloaded from the Roland Cloud into the TD-50X.
1 . Insert an SD card into the TD-50X (p. 10).
2 . Press the [SD CARD] button.
3 . Press the PAGE [UP] [DOWN] buttons to display page 2
(SD CARD BACKUP 1KIT).
4 . Press the [F2] (1KIT LOAD) button.
The SD CARD LOAD <1KIT> screen appears.
User sample icon
(shown only if a drum kit that uses user samples (p.
39) is selected)
5 . Select the type of data to load.
To load kit backup data that was saved to this unit, press the [F4]
(TDZ) button to make it go dark.
To load kit backup data downloaded from Roland Cloud, press the
[F4] (TDZ) button to make it light.
6 . Use the cursor buttons to select a parameter, and use
the [-] [+] buttons or the dial to load the data.
Parameter Explanation
With User Sample
Selects whether the user samples saved together
with the drum kit are loaded.
SD Card Selects the backup number.
User Selects the load-destination drum kit.
* When you load user samples, new user samples are created even
if the same user samples already exist. The newly created user
samples are automatically assigned to the loaded drum kit.
* In order to load user samples, there must be sufficient free space for
the user samples.
* If you are loading the kit backup data that does not include user
samples, you can’t select the “With User Sample” check box.
7 . Press the [F5] (LOAD) button.
A confirmation message appears.
If you decide to cancel, select “CANCEL” and press the [ENTER]
button.
* The license data for the kit backup data is saved to this unit the first
time you load the kit backup data downloaded from Roland Cloud.
A confirmation message appears if the license data has not been
saved to this unit.
If you decide to cancel, select “CANCEL” and press the [ENTER]
button.
* You cannot load kit backup data downloaded from Roland Cloud
if its license data differs from the license data saved to this unit. In
this case, delete the license data saved on this unit and try loading
it again (p. 62).
8 . Select “OK,” and press the [ENTER] button.
The backup data is loaded from the SD card.
Deleting Backup Data from an SD Card
(DELETE/1 KIT DELETE)
Here’s how to delete unneeded backup data (including user samples)
from an SD card.
1 . Insert an SD card into the TD-50X (p. 10).
2 . Press the [SD CARD] button.
3 . Use the PAGE [UP] [DOWN] and function buttons to
select the backup menu.
Backup menu Explanation
DELETE (page 1
(SD CARD BACKUP
ALL))
Deletes the backup data.
1 KIT DELETE
(page 2 (SD CARD
BACKUP 1KIT))
Deletes the kit backup data.
The SD CARD DELETE screen appears.
Example) When using DELETE