Roland TD-50X Prismatic V-Drums Sound Module - Manual (Page 44)

44
Using the Utilities
Configuring the Output for USB Audio
You can set the output destination of the USB audio that is output
from the USB COMPUTER port.
The USB audio output can be recorded on your computer. For example,
you can do a 32-channel multitrack recording in your DAW software.
* The LO CUT and ATT (OUTPUT ROUTING (p. 59)) effects are not
applied to the USB audio output. For details on other parameters,
refer to “Data List” (PDF).
MEMO
For details on settings in your DAW software, refer to the owner’s
manual of the DAW software you’re using.
Setting the output destination for USB audio
You can select from a total of 32 channels for the USB audio output
destination, including those listed below.
5 MASTER OUT and DIRECT OUT jacks (settings in common with the
output settings)
5 Direct output from each pad (AUX 1/2/3/4 are set together)
KICK, SNARE, TOM1, TOM2, TOM3, TOM4, HI-HAT, CRASH1, CRASH2,
RIDE, AUX1/2/3/4
Reference
For more about output destination settings, refer to “Audio Output
Assignments (OUTPUT)” (p. 57).
USB audio output destination settings
Ch1-2 MASTER
Ch3 DIRECT 1
Ch4 DIRECT 2
Ch5 DIRECT 3
Ch6 DIRECT 4
Ch7 DIRECT 5
Ch8 DIRECT 6
Ch9 DIRECT 7
Ch10 DIRECT 8
Ch11-12 KICK *
Ch13-14 SNARE *
Ch15-16 TOM1 *
Ch17-18 TOM2 *
Ch19-20 TOM3 *
Ch21-22 TOM4 *
Ch23-24 HI-HAT *
Ch25-26 CRASH1 *
Ch27-28 CRASH2 *
Ch29-30 RIDE *
Ch31-32 AUX 1/2/3/4 *
* Only ASIO is supported for Windows users.
Adjusting the USB audio output level
1 . In the SETUP MENU 1 screen (p. 57), press the [F2]
(USB AUDIO) button.
The USB AUDIO SETUP screen appears.
2 . Move the cursor to Output Gain, and use the [-] [+]
buttons or the dial to edit the value.
Parameter Value Explanation
Output Gain -24–+24dB
Adjusts the output level
This applies to all USB audio
output that is sent from the USB
COMPUTER port.
Specifying the Input for USB Audio
Here’s how to specify the USB audio input that is input to the USB
COMPUTER port.
This allows audio that is played back by the computer to be heard from
the TD-50X.
USB audio input destination settings
Ch1-2 MAIN
Ch3-4 SUB
Ch5-6 KICK *
Ch7-8 SNARE *
Ch9-10 TOM1 *
Ch11-12 TOM2 *
Ch13-14 TOM3 *
Ch15-16 TOM4 *
Ch17-18 HI-HAT *
Ch19-20 CRASH1 *
Ch21-22 CRASH2 *
Ch23-24 RIDE *
Ch25-26 AUX1 *
Ch27-28 AUX2 *
Ch29-30 AUX3 *
Ch31-32 AUX4 *
* Only ASIO is supported for Windows users.
1 . In the SETUP MENU 1 screen (p. 57), press the [F2]
(USB AUDIO) button.
The USB AUDIO SETUP screen appears.
2 . Use the cursor buttons to select a parameter, and use
the [-] [+] buttons or the dial to edit the value.
Parameter Value Explanation
Input Gain -36–+12dB
Adjusts the input level
This applies to the USB audio
inputs (Input MAIN, SUB) that are
input from the USB COMPUTER
port.
Volume Select
Input MAIN,
SUB
These parameters set which knobs adjust the
input volume for USB audio (Input MAIN, SUB).
OFF
The knobs are not used to adjust
the volume.
SONG
The [SONG] knob is used to adjust
the volume.
CLICK
The [CLICK] knob is used to adjust
the volume.
[F3]: Checks the USB audio routing.
[F4]: Shows the USB AUDIO level meter.
MEMO
For the USB audio input sound, you can choose from INPUT MAIN
and INPUT SUB as the output destination (p. 57).