Comparing with or reverting to the unedited drum, Snapshot) – Roland TD-50X Prismatic V-Drums Sound Module User Manual
Page 35
35
Customizing the Kits
Comparing with or Reverting to the
Unedited Drum Kit
(SNAPSHOT)
You can temporarily save the currently-edited drum kit, and compare
it with the current settings or revert back to it (Snapshot).
Save temporarily
(STOCK)
Edit
Immediately
after selecting
drum kit
(UNDO)
Current drum kit
(CURRENT)
1 .
Select the drum kit that you want to edit.
When you select a drum kit, the data of the selected drum kit is
stored in “UNDO.”
2 .
When you want to temporarily save the drum kit
settings that you’re editing, press the [SNAPSHOT]
button.
The SNAPSHOT screen appears, and the current drum kit (CURRENT)
is selected.
3 .
Press the [F5] (SAVE) button.
The current drum kit settings are saved in STOCK.
MEMO
Press the [SNAPSHOT] button while holding down the [SHIFT]
button to save the current drum kit settings in STOCK without
switching to the SNAPSHOT screen.
4 .
Press the [EXIT] button to exit the SNAPSHOT screen,
and edit the drum kit.
* When you switch drum kits, the settings saved in STOCK are
deleted.
5 .
Press the [SNAPSHOT] button.
6 .
Use the [F1]–[F3] buttons to switch between the saved
drum kits, and play them to compare.
Button
Explanation
[F1] (CURRENT) button
Current drum kit settings
[F2] (STOCK) button
Drum kit settings saved in STOCK
[F3] (UNDO) button
Settings immediately after selecting the
drum kit
7 .
To restore the current drum kit settings to the STOCK
settings or to the settings just after selecting the drum
kit, press the [F2] or [F3] button and select the drum kit
settings to restore.
If you want to continue with the current drum kit settings, press the
[KIT] button to return to the DRUM KIT screen.
8 .
Press the [F4] (RESTORE) button.
A confirmation message appears.
If you decide to cancel, select “CANCEL” and press the [ENTER]
button.
9 .
Select “OK,” and press the [ENTER] button.
The current drum kit settings return to the settings of the drum kit
that you selected in step 7.
10 .
Press the [KIT] button to return to the DRUM KIT screen.