Roland TD-50X Prismatic V-Drums Sound Module - Manual (Page 16)

16
Performing
Drum Kits and Instruments
On the TD-50X, the sounds that play when you strike each pad are
called “instruments.” A set of sounds (instruments) allocated to the
respective pads is called a “drum kit.”
Instruments
Drum kits
The drum kits are configured as shown below.
Drum kit 100
Ambience settings
Overhead mic sound, the reverberation of the location in which the drums are
played and related properties
Mixer settings
Volume, pan, multi-effect, equalizer, compressor and other settings for each pad
Overall settings for the entire drum kit
Volume, drum kit name, lit colors, etc.
Drum kit 1
KICK
TOM4
AUX1
SNARE
HI-HAT
AUX2
TOM1
CRASH1
AUX3
TOM2
CRASH2
AUX4
TOM3
RIDE
Pad settings
Instruments settings
Instrumental sounds, tuning, volume,
etc.
Selecting a Drum Kit
1 . Press the [KIT] button.
The DRUM KIT screen appears.
2 . Use the [-] [+] buttons or the dial to select a drum kit.
DRUM KIT screen
This is the main screen for the TD-50X, which appears when you press
the [KIT] button.
Drum kit number
User sample icon
Shown only if a drum kit that uses user samples
(p. 39) is selected.
Favorite icon
Shown only if a drum kit registered as a
favorite (p. 24) is selected
Brush icon
Shown only if Brush Switch is “ON.”
Tempo
Shown only if the kit tempo is “ON.”
Sub-kit name
Kit name
MEMO
You can change how the kit names (on the top row) shown on the
DRUM KIT screen look (the font used). For details, refer to “Data List”
(PDF).
Selecting a Drum Kit from the List
On the DRUM KIT screen, turn the [R1] (LIST) knob to display the kit list,
and select a drum kit from the list.