Roland TD-50X Prismatic V-Drums Sound Module - Manual (Page 58)

58
Settings
[F3] (MONITOR) button
This lets you check the output volumes for each jack.
* For details on the Master Out parameter for OUTPUT ROUTING,
refer to “Data List” (PDF).
3 . Strike a pad or press the cursor buttons [ K ] [ J ] to select
the pad or function that you want to configure.
Indication Explanation
K KICK
S SNARE
1–4 TOM 1–3
H HI-HAT
Indication Explanation
C CRASH 1, 2
R RIDE
A AUX 1–4
Indication Explanation
OH Overhead
RM Room
MFX1–3 Multi-effect 1–3 (p. 33)
SONG Song (p. 18)
CLICK
Click (p. 17) and song click track (p. 21)
output
MIXIN Sound that is input to the MIX IN jack (p. 18)
USB IN MAIN, SUB
Sound that is input to the USB COMPUTER port
(p. 44)
4 . Use the cursor [ H ] [ I ] buttons, the [-] [+] buttons, or the
dial to select the output destination.
MEMO
To return to the default values, press the [F4] (DEFAULT) button.
Also, when the [F2] (DIRECT) button is selected on page 1 (PAD
OUTPUT) and you press the [F4] (DEFAULT) button, you can select
the default values (factory default settings) and one more output
setting (STEREO ALL).
To restore the settings to their default values (factory default
settings), select “DEFAULT”; and to select one more output setting,
use the cursor buttons to select “STEREO ALL” and then press the [F5]
(RESET) button.
5 . Press the [KIT] button to return to the DRUM KIT screen.
Output destination setting examples
Here are some examples of output destination settings.
MEMO
The MASTER OUT jacks (XLR type) and DIRECT OUT jacks (1/4-inch
TRS phone type) are balanced outputs. The MASTER OUT jacks (1/4-
inch TRS phone type) are unbalanced outputs (p. 11).
Example 1: Default settings
With these settings, all sound is output from the PHONES and MASTER
OUT jacks for monitoring.
The sound from each pad is divided up and output to the DIRECT OUT
1–8 jacks, which signals are sent to your PA system.
Connector Output setting Example destination
PHONES All Monitor headphones
MASTER OUT All Drum monitor
DIRECT OUT 1 KICK
PA (external mixer)
DIRECT OUT 2 SNARE
DIRECT OUT 3 HI-HAT
DIRECT OUT 4 RIDE
DIRECT OUT 5/6
TOM 1–4
(Stereo)
DIRECT OUT 7/8
CRASH 1,
2, AUX1–4
(Stereo)
Example 2) Sending the same audio for monitoring
and PA
With these settings, the same sound will be output from the PHONES
jacks, the MASTER OUT jacks, and the DIRECT OUT (7, 8) jacks.
The sound being monitored by the performer will be the same as the
sound sent to the PA system.
* The master compressor and master EQ effects are not applied to
DIRECT OUT.
Connector Output setting Example destination
PHONES All Monitor headphones
MASTER OUT All Drum monitor
DIRECT OUT 1 − −
DIRECT OUT 2 − −
DIRECT OUT 3 − −
DIRECT OUT 4 − −
DIRECT OUT 5/6 − −
DIRECT OUT 7/8 All PA (external mixer)