Bulk import of audio files within a folder, Import all) – Roland TD-50X Prismatic V-Drums Sound Module User Manual
Page 40
40
Customizing the Kits
5 .
Use the cursor buttons to select an audio file, and press
the [F5] (SELECT) button.
The USER SAMPLE IMPORT (DESTINATION) screen appears.
6 .
Use the cursor buttons to select the import-destination
number, and press the [F5] (IMPORT) button.
If you select a number in which data already exists, the message
“User Sample Exists!” appears. Select a number that contains no
data.
7 .
Press the [F5] (IMPORT) button.
A confirmation message appears.
If you decide to cancel, select “CANCEL” and press the [ENTER]
button.
8 .
Select “OK,” and press the [ENTER] button.
The audio file is imported.
Bulk Import of Audio Files Within a Folder
(IMPORT ALL)
1 .
Insert an SD card into the TD-50X (p. 10).
2 .
Hold down the [SHIFT] button and press the [SETUP]
button.
3 .
Press the PAGE [UP] button to display the topmost
page.
4 .
Press the [F1] (IMPORT) button.
The USER SAMPLE IMPORT screen appears.
5 .
Use the cursor buttons to select an audio file, and press
the [F1] (IMPORT ALL) button.
The name of the folder for bulk import and the first number of the
import destination are shown.
* If there is already one or more user samples within the import
destination range, the message “User Sample Exists! Not Enough
Space to Import All” is displayed. Confirm that there are no existing
samples in the range, and then select a number.
6 .
Press the [F5] (IMPORT) button.
A confirmation message appears.
If you decide to cancel, select “CANCEL” and press the [ENTER]
button.
7 .
Select “OK,” and press the [ENTER] button.
The audio file is imported.
Assigning a User Sample to an Instrument
and Playing It
1 .
Press the [INSTRUMENT] button.
2 .
Press the PAGE [UP] button several times to display the
INSTRUMENT screen.
3 .
Press the [F1] (INST) button.
4 .
Select the pad to configure (p. 29).
5 .
Move the cursor to the Instrument category, and use
the [-] [+] buttons or the dial to select “USER SAMPLE.”
6 .
Turn the [R1] knob to select a user sample.
7 .
Press the [KIT] button to return to the DRUM KIT screen.
When you strike a pad to which the user sample is assigned, you
hear that user sample.
MEMO
5
You can adjust the sound of a user sample and apply effects to it in
the same way as for other Instruments.
“Editing Instruments (INSTRUMENT)” (p. 28)
5
You can also assign a user sample to a sub-instrument.