Configuring remote services upload, Setting up a proxy server, Enabling remote services – Xerox WorkCentre 6515DNI User Manual
Page 293
System Administrator Functions
Xerox
®
WorkCentre
®
6515 Color Multifunction Printer 293
User Guide
Configuring Remote Services Upload
Remote Services is a suite of features that simplify printer ownership and administration. It provides free
services to enable administration of metered billing and supplies replenishment plans for printers on a
network.
Before you begin, if your network uses an HTTP proxy server, obtain the information about your proxy
server. For details, refer to
Setting up a Proxy Server
on page 293.
Setting Up a Proxy Server
1.
At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press
Enter or Return.
2.
In the Embedded Web Server, log in as a system administrator. For details, refer to
Logging In as
the Administrator
on page 265.
3.
Click Connectivity.
4.
For Protocols, click HTTP.
5.
To enable a Proxy Server, for Proxy Server, click the toggle button.
Note:
A check mark on the toggle button indicates that the setting is enabled.
6.
To set the configuration type, click Setup and select an option:
−
If your proxy server uses automatic configuration, select Automatic.
−
If your proxy server uses a configuration script, select Configuration Script. Type the URL to
locate the configuration script.
−
If your proxy server uses manual configuration, select Manual, then configure the settings. For
assistance, contact your system administrator.
7.
Click OK.
Enabling Remote Services
1.
At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press
Enter or Return.
2.
In the Embedded Web Server, log in as a system administrator. For details, refer to
Logging In as
the Administrator
on page 265.
3.
Click System > Remote Services Upload.
4.
For Remote Services, click Enable.
5.
Click OK.