Configuring wpa2 enterprise authentication – Xerox WorkCentre 6515DNI User Manual
Page 228
System Administrator Functions
228
Xerox
®
WorkCentre
®
6515 Color Multifunction Printer
User Guide
Connecting to a Wireless Network Using the Control Panel
You can connect to a wireless network manually using the printer control panel. For details, refer to
Connecting to a Wireless Network Manually
on page 50.
Setting Up the Printer for Wireless LAN WPA2 Enterprise
WPA-Enterprise Encryption is supported only when Infrastructure is selected as the Network Type in the
Wi-Fi settings section.
Note:
To manage digital certificates, enable HTTPS communication.
1.
Import the required security certificate. For details, refer to
Importing a Digital Certificate
on page
Note:
Use Internet Explorer to import the certificate from Windows. Use Safari to import certificates
from Macintosh.
2.
Verify the Certificate Authorities within the category. For details, refer to
Verifying the Digital
Certificate Purpose
on page 291.
3.
Configure WPA2 Enterprise. For details, refer to
Configuring WPA2 Enterprise Authentication
on
page 228.
Configuring WPA2 Enterprise Authentication
Note:
WPA-Enterprise settings are unique for each network. For details on your settings, contact
your network administrator.
1.
At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press
Enter or Return.
2.
Click Connectivity.
Note:
If this feature does not appear, log in as a system administrator. For details, refer to
Logging
In as the Administrator
on page 265.
3.
For Connections, click Wi-Fi.
4.
Enter the SSID.
5.
For Network Type, select an option.
6.
Verify the TCP/IP Settings.
7.
For Security Settings, select an Encryption option, then enter the required information.
8.
Click OK.