Adjustments and maintenance procedures, Color registration, Performing a color registration adjustment – Xerox WorkCentre 6515DNI User Manual
Page 176
Maintenance
176
Xerox
®
WorkCentre
®
6515 Color Multifunction Printer
User Guide
Adjustments and Maintenance Procedures
This section includes:
•
Color Registration .......................................................................................................................................................... 176
•
Color Calibration ............................................................................................................................................................ 177
•
Scan Color Consistency ................................................................................................................................................ 177
•
Adjusting Paper Registration ..................................................................................................................................... 178
•
Transfer Voltage Adjustment .................................................................................................................................... 180
•
Adjusting the Fuser ....................................................................................................................................................... 180
•
Adjusting the Altitude .................................................................................................................................................. 180
•
Performing a Developer and Transfer Roller Cleaning Procedure ............................................................... 181
Color Registration
The printer automatically adjusts the color registration when automatic adjustment is turned on. You
can also adjust color registration manually any time the printer is idle. You must adjust the color
registration any time the printer is moved. If you are having printing problems, adjust the color
registration.
Performing a Color Registration Adjustment
A color registration adjustment occurs every time a new toner cartridge is installed. You can run this
adjustment at other times as needed.
To perform a color registration adjustment:
1.
At the printer control panel, press the Home button.
2.
Touch Device > Support > Color Registration.
3.
To perform an Automatic Color Registration adjustment, touch Start.
4.
At the successfully completed prompt, touch Close.
5.
To exit the menu, touch X.
6.
To return to the Home screen, press the Home button.