beautypg.com

Xerox WorkCentre 6515DNI User Manual

Page 214

background image

Troubleshooting

214

Xerox

®

WorkCentre

®

6515 Color Multifunction Printer

User Guide

Notes:

To enhance print quality, the toner/print/drum cartridges for many models of equipment are

designed to cease functioning at a predetermined point.

Grayscale images printed with the composite black setting increment the color-pages counter,

because color consumables are used. Composite black is the default setting on most printers.

Symptom

Probable Causes

Solutions

Page Margins Are

Inconsistent.

The image is not centered

on the page or the margins

are not consistent.

A paper registration

adjustment is

needed.

Use the paper registration procedure to adjust the image

position on the page. For details, refer to

Adjusting Paper

Registration

on page 178.

Faded printouts with multiple

colors faded.

The toner cartridges

are not Xerox

®

toner

cartridges.

Verify that the toner cartridges meet specifications, and

replace them if necessary.

The paper being used

is outside the

recommended

specification range.

Replace the paper with a recommended size and type,

and confirm that your control panel and print driver

settings are correct. For details, refer to

Supported Paper

on page 68.

The paper type is

heavier or thicker

than the paper type

selection.

Ensure that the proper paper is loaded in the paper

tray.

Choose a heavier paper type at the control panel and

in the print driver.

Use a lighter paper or paper type.

The bias transfer

voltage is not

properly adjusted for

the paper type.

Verify that the paper types set in the control panel and

the print driver match the paper loaded in the tray.

The settings in the

application or print

driver are incorrect.

Print the Demonstration Print from the Information Pages

menu. For details, refer to

Information Pages

on page 32.

If the Demo Print looks correct, the printer is printing

properly. Verify that the application and the print driver

selections are correct for your print job.

The paper is damp.

Replace the paper.

The high-voltage

supply is defective.

For assistance, go to the Xerox

®

Support website at

www.xerox.com/office/WC6515support.