Configuring fax defaults and settings – Xerox WorkCentre 6515DNI User Manual
Page 161
Faxing
Xerox
®
WorkCentre
®
6515 Color Multifunction Printer 161
User Guide
Configuring Fax Defaults and Settings
This section includes:
•
Configuring Fax Settings from the Embedded Web Server ........................................................................... 162
•
Configuring Fax Reports from the Embedded Web Server ............................................................................ 162
•
Configuring Fax Line Settings from the Control Panel .................................................................................... 163
•
Configuring the Fax Settings at the Control Panel ........................................................................................... 163
•
Modifying the Default Fax Settings ........................................................................................................................ 164
•
Configuring Fax App Settings at the Control Panel .......................................................................................... 164
It is unlawful to send a message from a fax machine without the proper Fax Send Header information.
The following information must appear on the first transmitted page, or in the top or bottom margin of
each transmitted page:
•
Identity of the business or individual sending the fax
•
Telephone number of the sending machine
•
Date and time of the transmission
The first time that the printer is powered on, the Installation Wizard runs. The Installation Wizard
process guides you through initial configuration of the printer and includes configuration of Fax settings
and defaults.
There are four areas to configure in Fax Settings:
•
Fax Line Settings
•
Incoming Defaults
•
Transmission Defaults
•
Fax Reports
For proper fax operation, before you use the fax, configure all of the settings. You can change the
settings using the control panel or the Embedded Web Server.
Note:
If your printer is connected to your computer through an Ethernet connection, to configure
the fax settings, use the Embedded Web Server.