Scan to desktop – Xerox WorkCentre 6515DNI User Manual
Page 135
Scanning
Xerox
®
WorkCentre
®
6515 Color Multifunction Printer 135
User Guide
Scan to Desktop
Before you begin:
•
Before scanning, ensure that your computer and the printer are plugged in, powered on, and
connected to an active network.
•
On your computer, ensure that you have the correct print driver software installed. For details, refer
to
Installing the Software
on page 60.
•
On your computer, ensure that the printer is installed using WSD. For details, refer to
Installing the
Printer as a Web Service on Devices
on page 66.
•
On your printer, ensure that WSD is enabled. For details, refer to
Enabling WSD Scan Services
on
page 263.
To Scan to Desktop:
1.
Load the original document on the document glass or into the duplex automatic document feeder.
2.
At the printer control panel, press the Home button.
3.
Touch Scan to Desktop.
4.
To select a destination, touch the computer address.
5.
To begin the scan, press Scan.
The Windows Fax and Scan application opens on your PC desktop. The image file of your scan is
saved to the Scanned Documents folder.
6.
If you are scanning from the document glass, when prompted, to finish, touch Done, or to scan
another page, touch
Add Page.
Note:
If you are scanning a document from the automatic document feeder, a prompt does not
appear.
7.
To return to the Home screen, press the Home button.