Condensation has formed inside the printer – Xerox WorkCentre 6515DNI User Manual

Page 196

Troubleshooting

196

Xerox

WorkCentre

6515 Color Multifunction Printer

User Guide

Condensation has Formed Inside the Printer

Moisture can condense inside a printer where the humidity is above 85% or when a cold printer is

located in a warm room. Condensation can form in a printer after it has been sitting in a cold room that

is heated quickly.

Probable Causes

Solutions

The printer has been sitting in a cold room.

Allow the printer to operate for several hours at room temperature.

The relative humidity of the room is too high. • Reduce the humidity in the room.

•

Move the printer to a location where the temperature and

relative humidity are within the operating specifications.