PLANET MGSW-28240F - Manual (Page 85)

Command Guide of MGSW-28240F
4.2.56.9 aggregation group
Command:
aggregation group
aggregation Create an aggregation
group Create an aggregation group
The aggregation group id
Default:
N/A
Usage Guide:
To configure aggregation group.
Example:
To configure aggregation group 7 for the GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # aggregation group 7
4.2.56.10 description
Command:
description
description Port description
specifies a comment or a description of the port to assist the user. (Length: 1-12 characters)
Default:
N/A
Usage Guide:
To configure port description.
Example:
To configure port description (IPTV_Port) for the GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # description IPTV_Port
-85-