PLANET MGSW-28240F - Manual (Page 133)

Command Guide of MGSW-28240F
4.2.56.99 qos storm unknown
Command:
qos storm unknown [fps]
qos Quality of Service
storm Storm policer
unknown Police unknown (flooded) frames
Policer rate (default kbps)
fps Rate is fps
Default:
500
Usage Guide:
To configure Unknown Frames Storm Control Rate of QoS for specific interface
Example:
To configure Unknown Frames Storm Control Rate (999 fps) of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos storm unicast 999 fps
4.2.56.100 qos tag-remark
Command:
qos tag-remark pcp dei
qos Quality of Service
tag-remark Tag remarking configuration
pcp Specify default PCP
Specific PCP
dei Specify default DEI
Specific DEI
Default:
0
Usage Guide:
To enable Tag-remark default mode of QoS for specific interface
-133-