PLANET MGSW-28240F - Manual (Page 260)

Command Guide of MGSW-28240F
4.2.159 network-clock clk-source ssm-overwrite
Command:
network-clock clk-source ssm-overwrite { prc | ssua | ssub | eec2 |
eec1 | dnu }
network-clock network-clock
clk-source clk-source - commands related to a specific clock source.
Clock source number
ssm-overwrite Clock source SSM overwrite
dnu dnu
eec1 eec1
eec2 eec2
prc prc
ssua ssua
ssub ssub
Default:
None
Usage Guide:
To configure SSM overwrite of network-clock
Example:
To configure SSM overwrite (prc) of network-clock (source 1)
Switch# configure terminal
Switch (config)# network-clock clk-source 1 ssm-overwrite prc
4.2.160 network-clock option
Command:
network-clock option { eec1 | eec2 }
network-clock network-clock
option EEC options
eec1 EEC1: DPLL bandwidth = 3,5 Hz, pull-in range = +/-12 ppm
eec2 EEC2: DPLL bandwidth = 0,1 Hz, pull-in range = +/-12 ppm
-260-