PLANET MGSW-28240F - Manual (Page 70)

Command Guide of MGSW-28240F
<1-15> Level number
The UNENCRYPTED (cleartext) password.
Default:
Disable
Usage Guide:
To configure enable password and specific level for user
Example:
To configure enable password(admin) and specific level(15) for user
Switch# configure terminal
Switch (config)# enable password level 15 admin
Press ENTER to get started
Username:
Password:
> enable
Password: admin
#
4.2.38 enable secret
Command:
enable secret 0 | 5 level <1-15>
0 Specifies an UNENCRYPTED password will follow
5 Specifies an ENCRYPTED secret will follow
<1-15> Level number
The UNENCRYPTED (cleartext) / ENCRYPTED(MD5) password.
Default:
Disable
Usage Guide:
To configure enable password to encrypted secret in the system configurations and specific level for user
Example:
To configure enable password(cisco) to encrypted secret in the system configurations and specific level(15) for user
-70-