PLANET MGSW-28240F - Manual (Page 404)

Command Guide of MGSW-28240F
To display the unicast slave table.
Example:
To display the unicast slave table for PTP instance 0.
Switch # show ptp 0 slave-table-unicast
ip_addr mac_addr port Ann Sync
--------------- ----------------- ---- --- -----
4.21.84 show ptp ext
Command:
show ptp ext
show Show running system information
ptp Precision time Protocol (1588)
ext Show the 1PPS and External clock output configuration and vcxo frequency rate adjustment option
Default:
N/A
Usage Guide:
To display the external clock output configuration.
Example:
To display the external clock output configuration.
Switch # show ptp ext
PTP External One PPS mode: Output, Clock output enabled: True, frequency : 1, VCXO
enable: True
4.21.85 show pvlan
Command:
show pvlan [ ]
show Show running system information
pvlan PVLAN configuration
Default:
-404-