PLANET MGSW-28240F - Manual (Page 135)

Command Guide of MGSW-28240F
Usage Guide:
To enable DSCP Classification of QoS for specific interface
Example:
To enable DSCP Classification of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos trust dscp
4.2.56.103 qos trust tag
Command:
qos trust tag
qos Quality of Service
trust Trust configuration
tag VLAN tag
Default:
Disabled
Usage Guide:
To enable VLAN tag Classification of QoS for specific interface
Example:
To enable VLAN tag Classification of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos trust tag
4.2.56.104 rmon collection history
Command:
rmon collection history <1-65535> buckets <1-65535> interval <1-3600>
rmon Configure Remote Monitoring on an interface
collection Configure Remote Monitoring Collection on an interface
-135-