PLANET MGSW-28240F - Manual (Page 156)

Command Guide of MGSW-28240F
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# end
Switch#
4.2.57.3 exit
Command:
exit
exit Exit from current mode
Default:
None
Usage Guide:
To exit current mode
Example:
To exit current mode.
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# exit
Switch (config)#
4.2.57.4 ip address
Command:
ip address
ip Interface Internet Protocol config commands
address Address configuraton
IP address
IP netmask
Default:
None
-156-