PLANET MGSW-28240F - Manual (Page 147)

Command Guide of MGSW-28240F
4.2.56.123 switchport hybrid ingress-filtering
Command:
switchport hybrid ingress-filtering
switchport Switching mode characteristics
hybrid Change PVID for hybrid port
ingress-filtering VLAN Ingress filter configuration
Default:
Enabled
Usage Guide:
To enable Ingress-filtering with Hybrid VLAN mode for specific interface
Example:
To enable Ingress-filtering with Hybrid VLAN mode for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport hybrid ingress-filtering
4.2.56.124 switchport hybrid native vlan
Command:
switchport hybrid native vlan
switchport Switching mode characteristics
hybrid Change PVID for hybrid port
native Set native VLAN
vlan Set native VLAN when interface is in hybrid mode
VLAN ID of the native VLAN when this port is in hybrid mode
Default:
1
Usage Guide:
To configure PVID in Hybrid VLAN mode for specific interface
-147-